Workforce Sizing works out how many radiologists a service needs

It turns a radiology service's examination volumes and clinical work into the senior medical officer FTE needed to do that work, and shows the gap against the FTE on the roster.

Health NZ · radiology workforce planning Unit of planning: the grain Region, district, grain

Open Workforce Sizing

What it does

For each radiology service, Workforce Sizing works out how many senior medical officer (SMO) FTE the incoming work needs and compares that with the FTE the service has. Every service is sized the same way, so the figures can be compared across the country.

Work in

Examination volumes by modality and complexity, and the clinical work that is not reporting: meetings, procedures, teaching and supervision.

Calculation

The work becomes clinical hours, and the hours become a required FTE, using the service's own leave and non-clinical allowance.

Gap out

Required FTE less the FTE on the roster is the gap. Each grain is marked understaffed, adequate or overstaffed, and the figures add up to district, region and national totals.

Workforce Sizing · Capacity
The Capacity tab for the Capital & Coast grain,
          showing current diagnostic FTE and the FTE gap in the header, five figures for reporting
          hours, CNR hours, total clinical hours, required diagnostic FTE and reporting capacity,
          and a bar chart of reporting hours by modality.
A grain's Capacity tab: the hours, the required FTE and the gap on one screen. Click any screenshot on this page to enlarge it.
The tool sizes the service as a whole, meaning the SMO establishment needed to meet its demand. It does not roster people or manage leave. Its figures are for business cases, recruitment and capacity planning. The screen calls it Radiology Workforce Sizing; its web address, its code and older documents call it Service Sizing.

Grains and workload

Four ideas explain most of the screens: the grain, its archetype, time constants, and the split between reporting and other clinical work.

The hierarchy

Regions and districts come from Site Profiles. The grain is this tool's own unit.

RegionNorthern, Te Manawa Taki, Central, Te Waipounamu
Districta health district
Grainthe unit of workforce planning
One or more facilitiesthe sites it covers

The grain

A grain is a planning unit: one radiology service, covering one or more facilities. Its inputs are kept on the grain (volumes, activities, meetings, FTE settings and staffing), and the calculation runs per grain before the results are added up. A satellite facility joins its parent's grain. An administrator can merge two grains that share one group of SMOs, and undo the merge later. As of November 2026 there are 56 grains in production.

Archetypes

Each grain has an archetype from XL to XS. In the Library, each standard activity and meeting is marked as a default for one or more archetypes.

XLLargest
LLarge
MMedium
SSmall
XSSmallest

Modalities and time constants

Demand is counted per modality. Each modality and complexity pair has a time constant, the minutes it takes to report one examination, which turns volume into reporting hours.

CT
MR
US
XR
NM
MG
FL

CT, MRI, ultrasound, X-ray, nuclear medicine, mammography and fluoroscopy.

Reporting and CNR

SMO clinical time is split in two. Reporting grows with examination volume. All other clinical work is clinical non-reporting (CNR), in four categories.

R Reporting: diagnostic reporting Grows with volume
1 CNR 1 Conferences: meetings and MDMs Fixed hours
2 CNR 2 Procedural / Interventional Fixed hours
3 CNR 3 Training: teaching and supervision Fixed hours
4 CNR 4 Other Activities: administration and governance Fixed hours

Non-clinical time is a percentage allowance set on FTE Config. Non-clinical activities can be listed for the record, but they add no hours.

Staffing figures come from Site Profiles and are read-only here. The grain list goes the other way: Site Profiles, the identity hub and My HNZ Radiology read their grains from Workforce Sizing.

The calculation

Every figure in a result can be traced back to an input. The calculation has four steps.

1

Reporting workload

For each modality and complexity, annual volume times minutes per report, converted to hours.

reporting_hours = Σ (volume × minutes_per_report) ÷ 60
2

Non-reporting workload

The hours of every CNR 1 to 4 activity, plus the preparation and attendance hours of each MDM and recurring meeting.

fixed_cnr_hours = Σ CNR 1 to 4 activity hours + MDM meeting hours
3

Clinical hours per FTE

Standard annual hours less leave (annual, public holidays, training, sick and other) gives productive hours. The non-clinical percentage comes off that.

productive = standard_hours − all_leave clinical_hours_per_FTE = productive × (1 − non_clinical_%)
4

Required FTE and the gap

Total clinical hours divided by the hours one FTE gives, compared with effective FTE: diagnostic SMO FTE, less on-call FTE, plus the share of interventional radiologist time that goes to reporting.

required_FTE = (reporting_hours + fixed_cnr_hours) ÷ clinical_hours_per_FTE fte_gap = required_FTE − effective_FTE

Try the calculation

Move the sliders. The calculator runs the four steps above with the app's default assumptions: 2,086 standard hours, less 240 hours of annual leave, 96 of public holidays, 80 of training and 60 of sick leave. In the app, each grain uses its own saved settings.

Inputs

Result

Productive hours per FTE1,610
Clinical hours per FTE1,208
Total clinical hours needed51,000
42.2
Required FTE
Understaffed
Gap (required less effective FTE)+14.2

The app marks a grain understaffed when it needs more than 0.5 FTE above its effective FTE, overstaffed when it has more than 0.5 FTE to spare, and adequate in between. The 0.5 is a national setting that an administrator can change. A grain with no volumes shows no result.

Effective FTE is more than a headcount. On-call FTE comes off diagnostic capacity, and only the part of interventional radiologist FTE set aside for reporting is added back, up to the grain's interventional FTE.
Where a grain records outsourced volumes, the Capacity tab can also show the requirement if that work were reported in-house. The All activity view shows it.

The screens

Two national views, a page for each grain with Analysis and Configuration tabs, and pages for administrators.

National views
Home page

National Overview

Everyone

Totals across the grains a person can see: the number of grains, current and required FTE, the FTE gap, and how many grains are understaffed or adequate. Each grain links to its own page.

Side by side

Compare Grains

Everyone

Several grains in columns: required and effective FTE, the gap, on-call FTE, reporting, CNR and total clinical hours, the per-FTE hours, the non-clinical percentage, archetype, district, each modality's time constants and the hours in each CNR category. It shows why two services of a similar size come out differently.

A grain's page: Analysis

A grain's page opens on the Analysis tabs, which show results. The header gives the grain's current diagnostic FTE and its FTE gap for the year. The header shows a shortfall as a minus figure (for example −3.14 FTE), the opposite sign to the gap in the calculation above and in the Scenario Planner.

Analysis

Capacity

Everyone

The grain's result in five figures: Reporting Required, CNR Required and Total Clinical Required, all in hours, then Required Diagnostic FTE and Reporting Capacity. A note above them says whether the figures come from demand volumes or baseline volumes.

Reporting Capacity is the share of clinical time left for reporting once CNR is taken out. A low figure means meetings and procedures take most of the service's clinical time.
  • In-house only and All activity switch between in-house work and in-house plus outsourced work, for grains that record outsourced volumes.
  • Calculation detail opens the full working, down to the effective FTE used.
Capacity · Reporting detail
The Reporting Hours by Modality table showing each
            modality's simple and complex volumes, minutes per report, and total reporting hours.
Each modality's volumes and minutes per report, totalled into reporting hours.
Analysis

Scenario Planner

Everyone

The Model scenarios button on the Capacity tab opens the Scenario Planner. It shows the baseline result, four assumptions to change, and the scenario result beside it. Nothing changed here is saved to the grain.

  • On-call FTE, subtracted from diagnostic FTE.
  • Interventional reporting FTE, added to diagnostic reporting FTE.
  • Time constants, a uniform change of −50% to +50% to every modality's minutes per report.
  • Add / remove FTE, for example +1.0 for a new hire.
Capacity · Scenario Planner
The Scenario Planner with the baseline
            required FTE, current FTE and gap, inputs for on-call FTE, interventional reporting FTE,
            a time constants slider and add or remove FTE, and the scenario result below.
The baseline result at the top, the scenario result at the bottom.
Analysis

Workforce

Everyone

The SMO Roster: diagnostic SMO FTE, total medical FTE and the role breakdown, with the on-call and interventional adjustments that turn current FTE into effective FTE. Staffing Scenarios below it gives the clinical and reporting hours available at each FTE level.

  • These figures come from Site Profiles and are read-only here. A change to the roster is made in Site Profiles, and an administrator then runs Sync.
Grain · Workforce
The Workforce tab showing the SMO roster from
            Site Profiles, the role breakdown, and a staffing scenarios table of hours available at
            each FTE level.
The roster and role breakdown, and the hours available at each FTE level.
Analysis

Forecast

Everyone

A 10-year FTE forecast for a chosen demand scenario (actual, base, high or low), drawn against current FTE, with a year-by-year table under the chart. It needs demand volumes for several years under that scenario.

A grain's page: Configuration

The Configuration tabs hold the inputs. Editors can change them for grains in their own regions.

Configuration

Baseline Volumes

Editors

The annual examination counts that drive reporting workload, per modality, by complexity (simple or complex) and patient type (inpatient or outpatient), with in-house and outsourced counts kept apart.

  • Simple and complex are entered separately because each has its own time constant.
  • Outsourced counts feed the All activity view on the Capacity tab.
  • Baseline volumes are used when a grain has no demand volumes for the year being viewed.
Configuration

Non-Reporting

Editors

Every clinical task that is not reporting. Add Activity offers the standard tasks from the Library, filtered by category, or a custom task can be entered. Each activity has a CNR category, a unit of measure, the minutes per unit and an annual volume.

Annual hours = annual volume × minutes per unit ÷ 60. The figures at the top of the tab total each category as activities are added.
  • The categories are CNR 1 Conferences, CNR 2 Procedural / Interventional, CNR 3 Training and CNR 4 Other Activities.
  • MDM preparation and attendance appear here under CNR 1, but they are set up on the MDM / Meetings tab and should not be entered again as activities.
  • Non-clinical tasks can be listed for the record. They add no hours; non-clinical time is the percentage on FTE Config.
Configuration · Non-Reporting
The Non-Reporting tab showing CNR category
              totals and a list of activities grouped by CNR category.
Category totals and the activity list.
Add Activity
The Add Activity dialog with a search box and
              category filters, listing activities from the Library.
Adding an activity from the Library.
Configuration

MDM / Meetings

Editors

Recurring multidisciplinary meetings, each with a frequency, a duration, a prep time setting and the number of radiologists who attend. The tool works out the annual hours and adds them to CNR 1 Conferences.

Preparation is the duration times a multiplier: none (×0), simple (×1.5), complex (×2) or a custom figure. Attendance is the duration times the number of attendees. The tab shows both per week, then the total for the year. The simple and complex multipliers are national settings that an administrator can change.
  • Frequency is daily (five a week), weekly, fortnightly or monthly.
  • Attendance grows with each attendee, so only the radiologists who attend should be counted.
  • Total hrs/yr is the figure that goes into the Capacity result.
Configuration · MDM / Meetings
The MDM and Meetings tab listing each meeting with
              its duration, complexity, attendees, frequency and annual hours.
Each meeting's frequency, multiplier, and prep and attendance hours.
Add MDM
The Add MDM dialog with a search box listing
              standard meetings from the Library, and an option to enter a custom meeting.
A standard meeting from the Library, or a custom one.
Configuration

FTE Config

Editors

What one FTE is worth at this grain. It starts from standard annual hours and takes off each kind of leave: annual, public holidays, training, sick and other. Productive hours update as the figures are typed.

Clinical hours per FTE = productive hours × (1 − non-clinical %). Required FTE is total clinical hours divided by this figure.
  • The non-clinical percentage covers administration and support time that is not listed as activities.
  • On-call FTE is taken off diagnostic capacity.
  • Interventional reporting allocation adds back the part of interventional radiologist time spent on diagnostic reporting, up to the grain's interventional FTE.
  • Each grain has its own settings, so a small rural service and a tertiary centre can carry different assumptions.
Configuration

Demand Forecast

Editors

Examination volumes for a chosen year and scenario (actual, base, high or low), by modality, patient type and complexity. Where volumes exist for the year being viewed, the calculation uses them in place of baseline volumes. Volumes across several years drive the Forecast tab.

Configuration

History

Everyone

Every change to the grain, with the email of the person who made it and when.

Administration

Library

The standard activities and MDM meetings, with default values. Each is marked as a default for one or more archetypes.

Time Constants

The national minutes per report for each modality and complexity, and the global settings, including the MDM prep multipliers. A change applies to every grain.

CSV Upload

Imports baseline volumes or demand volumes from a CSV file. A template can be downloaded with every current grain filled in. Open to editors as well as administrators.

Sync

Creates and updates grains from Site Profiles facilities and refreshes their staffing. A satellite facility is attached to its parent's grain. Merged grains are listed here and can be unmerged.

Who can do what

Sign-in is through the HNZ Rad Tools identity hub. An administrator gives each person access, and gives editors the regions they can edit.

TaskViewerEditorAdmin
See the National Overview, results and forecastsYesYesYes
Compare grains and read historyYesYesYes
Edit a grain's configuration and volumes (editors: in their regions)NoYesYes
CSV UploadNoYesYes
Merge and unmerge grains, run SyncNoNoYes
Manage the LibraryNoNoYes
Edit Time Constants and global settingsNoNoYes

Where to find it

Workforce Sizing is at service-sizing.hnzradtools.nz, and the HNZ Rad Tools portal links to it. It needs a sign-in, and access is by request: an administrator sets it up in the identity hub. Inside the app, Help & Guide in the sidebar covers the same ground as this page.

Open Workforce Sizing

How it is built is in the architecture pack (Health NZ staff sign-in).